Power Supply; Physical Details - TANDBERG evolution 5000 E5710 Instruction Manual

B.5

Power Supply

This equipment is fitted with an auto-ranging power supply. It is suitable
for supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6%
at 50/60 Hz nominal.
Table B.17: AC Power Supply Specification
Item
Power distribution system
Connection to supply
Class of equipment
Rated voltage
Rated frequency
Voltage selection
Rated current
Input connector
Fuse
Fuse type 5 x 20 mm
Fuse current rating
Power consumption 1U
Stand-by power
B.6

Physical Details

Table B.18: Physical Details
Item
Height
Width
Overall width
Depth
Approximate weight
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Specification
Type TN ONLY (EN 60950 para 1.2.12.1): Power distribution system having one point
directly earthed, the exposed conductive parts of the installation being connected to
that point by protective earth conductors. This equipment must NOT be used with
single-phase three-wire and PE, TT or IT Type Power distribution systems.
Pluggable Equipment Type A (EN 60950 para 1.2.5): Equipment which is intended for
connection to the building power supply wiring via a non-industrial plug and
socket-outlet or a non-industrial appliance coupler or both. Correct mains polarity
must always be observed. Do not use reversible plugs with this equipment.
Class I Equipment (EN 60950 para 1.2.4): electric shock protection by basic
insulation and protective earth.
100-120/220-240 Vac (single phase)
50/60 Hz
Auto-ranging
1U 2 A (100-120 Vac range)
1 A (220-240 Vac range)
4 A (100-120 Vac range)
2U
2 A (220-240 Vac range)
CEE 22/IEC 3-pin male receptacle
Fuse in live conductor in power input filter at rear of unit. Do not use reversible plugs
with this equipment.
IEC127 Sheet V e.g.:
Bussmann S505 series
Littelfuse 215 series
5 A 250 V T HBC
150 W maximum
2U 250 W maximum
1U 6 W typically
2U 15 W typically
Specification
1U, 44.5 mm chassis
2U, 88.9 mm chassis
1U, 442.5 mm excluding fixing brackets
2U, 442.5 mm excluding fixing brackets
1U, 482.6 mm including fixing brackets
2U, 482.6 mm including fixing brackets
1U, 545 mm excluding rear connector clearance
2U, 545 mm excluding rear connector clearance
1U, 7.5 kg (16.5 lbs)
2U, 11.5 kg (25.3 lbs)
Technical Specification
Page B-11