Audio Menu; Overview; Audio A And B Menus; Introduction - TANDBERG evolution 5000 E5710 Instruction Manual

4.9

Audio Menu

4.9.1

Overview

The Audio Menu is selected from the Setup Menu by pressing the Audio
softkey. This menu permits the selection of audio parameters. Any option
with a clear circle next to it cannot be accessed and changed. It is for
status information only (see Figure 4.15 for menu structure).
Although a full list of menu options are given, it depends upon the Coding
Standard selected as to which are shown on the front panel display.
4.9.2

Audio A and B Menus

Introduction

Audio A and B have the same menu options, depending upon the Coding
Standard selected. Audio A Menus are shown as examples. The Audio A
Menu is selected from the Audio Menu by pressing the Audio A softkey.
This menu permits the selection of individual channel audio parameters.
SDI De-embedded 1
SDI De-embedded 2
SDI De-embedded 3
SDI De-embedded 4
Analogue A/Digital A
Analogue B/Digital B
Figure 4.14: Setting up the Audio Input
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Set up the Audio in this sequence
Setup/Audio
Source Option
SDI Video
Audio In
Empty
Packets
∞
– dB
Test Tone
1 kHz, 0 dB
Operating the Equipment Locally
Setup/Audio
Coding Standard
Option
Encoding
MPEG Layer 2
Dolby Digital (AC-3)
E5710 and E5720 Encoder
Setup/Audio
Coding Mode
Option
Encoding
Mono
Stereo
etc
Page 4-51