Sabus Data Bits Option; General Menu; Overview; Model Number Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally

SABus Data Bits Option

To access the SABus Data Bits option, press the SABus Data Bits softkey
in the Remote Control Menu.
SABus Data Bits
SABus Data Bits :
Table 4.13: SABus Data Bits Options
Selected Option
8 (1 stop bit)
7 (2 stop bits)
4.7.5

General Menu

Overview

The General Menu is selected from the System Menu by pressing the
General softkey. This menu provides options for amending the general
parameters of the Encoder. See Figure 4.9 for the General Menu structure.

Model Number Option

The Model Number option is shown in the General Menu. It cannot be
changed.

Config Name Option

To access the Config Name option, press the Config Name softkey in the
General Menu. These are the names of stored Encoder set-ups. They can
be recalled from the Configs Menu (see Section 4.15, Configs Menu).
Config Name
¬ Left
® Right
l Ins
l Del

Local Time Option

To access the Local Time option, press the Local Time softkey in the
General Menu.
Local Time
¬ Left
® Right
O
O
Page 4-24
8 (1 stop bit)
Update using softkeys
Description
Config Name :
`Auto 8 Mbit/s'
Update using softkeys
Local Time :
`14:08:38'
Update using softkeys
Enter l
Quit l
Enter l
Quit l
Enter l
Quit l
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
+
—
+
—
ST.TM.E10074.1