Si Level Option; Program Number Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally
Table 4.2: Syntax Options
Selected Option
ATSC
DVB

SI Level Option

To access the SI Level option, press the SI Level softkey in the Service
Info Menu. This enables the service information level to be specified. Use
the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.
SI Level
SI Level :
Table 4.3: SI Level Options
Selected Option
PAT/PMT/CAT only
PAT/PMT only
Off
On
On (No EIT)

Program Number Option

To access the Program Number option, press the Program Number
softkey in the Service Info Menu. This enables the Program Number to
be specified. In ATSC this is used as the basis of the PMT PID (same as
Service ID in DVB). The information is included in the Program Association
Table (PAT), Program Map Table (PMT) and VCT.
NOTE...
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Program Number
¬ Left
® Right
l Ins
l Del
Page 4-16
Description
Advanced Television Standards Committee.
Digital Video Broadcasting.
PAT/PMT/CAT only
Update using softkeys
Description
Program Association Table/ Program Map Table/ Conditional
Access Table.
Program Association Table/ Program Map Table.
Elementary streams only.
PAT/PMT/CAT/TDT/SDT/NIT/EIT – minimum DVB.
PAT/PMT/CAT/TDT/SDT/NIT.
Program Number :
`2'
Update using softkeys
Comments
See page 4-17
Enter l
Quit l
Enter l
Quit l
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
+
—
ST.TM.E10074.1