4.12.7 Fpga Firmware; 4.12.8 Ras Firmware; 4.12.9 Ras Options Enabled; Scramble Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally
Table 4.85: PCR PID Options
Selected Option
Min:
Max:
Step Size:

4.12.7 FPGA Firmware

This option indicates the version of the FPGA Firmware. It is for status only
and cannot be changed.

4.12.8 RAS Firmware

This option indicates the version of the RAS Firmware. It is for status only
and cannot be changed.

4.12.9 RAS Options Enabled

Scramble Option

To access the Scramble option, press the Scramble softkey in the Mux
Menu. This enables RAS1 security scrambling of the Encoder transmission
to be switched on or off.
Table 4.86: Scramble Options (RAS)
Selected Option
RAS1 (SNG Key)
Off

SNG Key (RAS1) Option

To access the SNG Key (RAS1) option, press the SNG Key (RAS1)
softkey in the Mux Menu. This enables the scrambling key used in SNG Key
scrambling mode to be set (see the Scramble option). The same
scrambling code must be used at the receive end to unscramble the
transmission.
Enter up to seven digits using the keypad, then press the Enter softkey to
accept the scrambling code. If less then seven digits are entered, they are
prefixed with 0's (zero) to give a seven digit code.
SNG Key (RAS1)
¬ Left
® Right
l Ins
l Del
Page 4-84
Description
1
8190 (1FFEh)
1
Description
Encoder output is scrambled. Scrambling key used is
entered using the SNG Key (RAS1) option.
Encoder output is not scrambled.
SNG Key (RAS1) :
`0000123'
Update using softkeys
Enter l
Quit l
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
ST.TM.E10074.1