Smpte 302M Standard Option; Channel Option - TANDBERG evolution 5000 E5710 Instruction Manual

SMPTE 302M Standard Option

NOTES...
1. This option is only shown when the Coding Standard is Linear PCM or Dolby E Pass-Thru.
2. Problems may be experienced with some Receivers if the Encoder and Decoder are not using
the same version of SMPTE 302M specification, e.g. either 1998 or 2000. The Encoder can be
set up to work in either standard.
To access the SMPTE 302M Standard option, press the SMPTE 302M
Standard softkey in the Audio A Menu. This enables the SMPTE 302M
standard that the audio is being encoded to to be specified. Use the + and
– softkeys to scroll through the options and then press the Enter softkey
after selecting one of them.
SMPTE 302M Standard
SMPTE 302M Standard :
Table 4.50: SMPTE 302M Standard Options
Selected Option
1998 Standard
2000 Standard

Channel Option

NOTE...
This option is only shown when the Coding Standard is Linear PCM or Dolby E Pass-Thru.
To access the Channel option, press the Channel softkey in the Audio A
Menu. This indicates the number of the audio channel.
Channel
¬ Left
® Right
l Ins
l Del
Table 4.51: Channel Options
Valid Input Range
Min:
Max:
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
1998 Standard
Update using softkeys
Description
Refers to the 1998 SMPTE 302M standard.
Refers to the 2000 SMPTE 302M standard.
Channel :
`1'
Update using softkeys
Description
0 This value is written to the channel identification field in the
15 (SMPTE 302M) AES3 data elementary stream header.
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-59