Rear Panel Description; Introduction; 1U Chassis; Boards In The Basic Encoder - TANDBERG evolution 5000 E5710 Instruction Manual

1.4.4

Rear Panel Description

Introduction

The Encoder provides connectors at the rear panel. All, except the power
connector, are physically located on the separate modules which comprise
the Encoder.

1U Chassis

Option Slots 1-2
Base Board
Alarm
Figure 1.10: E5710 (1U) Rear Panel Component Parts and Connectors
2U Chassis
Alarm
Base Board
Option Slots 4-6
Option Slots 1-3
Figure 1.11: E5720 (2U) Rear Panel Component Parts and Connectors
1.4.5

Boards in the Basic Encoder

The basic Encoder contains one board mounted horizontally in the
enclosure (see Table 1.8). Option modules can be fitted in the remaining
slots; two in the 1U version and up to six in the 2U (see Figure 1.10,
Figure 1.11 and Chapter 3, Options and Upgrades).

Table 1.8: Boards in the Basic Encoder

Model Number
E5710 / E5720
Access to the modules or the Base Board is not required for normal
operation and may invalidate the warranty.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Option Slot 1
RS-232/
RS-422 RS-232
Data Data RS-485
Control
RS-232/
RS-422
RS-232
RS-485
Data
Data
Control
Option Slot 4
Option Slot 1
Card
S11171 Encoder Base Board
Ethernet ASI Outputs
SDI In
ASI
Outputs
Ethernet SDI In
Option Slot 5
Option Slot 2
Introduction to the Basic Encoder
Option Slot 2
H Sync Composite Audio In and
Audio
Video
Reference Out
Audio In and
Audio
Composite
Reference Out
H Sync
Video
Option Slot 6
Option Slot 3
Page 1-17