Service Info Menu (Syntax = Atsc); Overview; Channel Name Option; Event Name Option - TANDBERG evolution 5000 E5710 Instruction Manual

4.7.2

Service Info Menu (Syntax = ATSC)

Overview

The Service Info Menu is selected from the System Menu by pressing the
Service Info softkey. This menu provides options for configuring the
Service Information (SI) parameters transmitted in the output transport
stream.
See Figure 4.9 for the menu structure when the Syntax option has been
set to ATSC.

Channel Name Option

To access the Channel Name option, press the Channel Name softkey in
the Service Info Menu. This option allows the Channel name to be
changed. The information is included in the Virtual Channel Table (VCT).
Channel Name
¬ Left
® Right
l Ins
l Del

Event Name Option

To access the Event Name option press the Event Name softkey in the
Service Info Menu. This option allows the Event name to be changed.
The information is included in the Event Information Table (EIT).
Event Name
¬ Left
® Right
l Ins
l Del

Syntax Option

To access the Syntax option for the output Transport Stream and
associated SI/PSIP, press the Syntax softkey in the Service Info Menu.
This enables the syntax to be specified. Use the + and – softkeys to scroll
through the options and then press the Enter softkey after selecting one
of them.
Syntax
¬ Left
® Right
l Ins
l Del
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Channel Name :
`TANDBERG'
Update using softkeys
Event Name :
FOOTBALL 1
Update using softkeys
Syntax :
ATSC
Update using softkeys
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-15