Modulation Type
Modulation Type :
Table 4.67: Modulation Type Options
Selected Option
QPSK
16-QAM
64-QAM
Hierarchy Option
To access the Hierarchy option, press the Hierarchy softkey in the
Delivery Descriptor Menu. This screen enables the hierarchy of the
terrestrial transmission to be specified.
Hierarchy
Hierarchy :
Table 4.68: Hierarchy Options
Selected Option
Non-Hierarchical
Alpha=1
Alpha=2
Alpha=4
FEC (HP) and FEC (LP) Options
To access the FEC (HP) or the FEC (LP) option, press the FEC (HP) or
FEC (LP) softkey in the Delivery Descriptor Menu. These screens
enable the inner FEC schemes used by the terrestrial transmitter to be
specified.
NOTE...
If the Hierarchy option is set to Non-Hierarchical, then only the FEC Rate parameter is used and
shown on the display.
If the Hierarchy option is set to Alpha=n, then the FEC (HP) and
FEC (LP) parameters provide two levels of modulation. Transmission
starts with the code rate for the HP level of modulation and ends with the
code rate for the LP level.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
QPSK
Update using softkeys
Description
Terrestrial transmitter uses QPSK modulation.
Terrestrial transmitter uses 16QAM modulation.
Terrestrial transmitter uses 64QAM modulation.
Non-Hierarchical
Update using softkeys
Description
Terrestrial transmission is not hierarchical.
Terrestrial transmission is hierarchical, and the a value = 1.
Terrestrial transmission is hierarchical, and the a value = 2.
Terrestrial transmission is hierarchical, and the a value = 4.
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-75