Embedded 1-2 Did Option; Embedded 3-4 Did Option; Audio Pid Option; Hardware Release Option - TANDBERG evolution 5000 E5710 Instruction Manual

Embedded 1-2 DID Option

To access the Embedded 1-2 DID option, press the Embedded 1-2 DID
softkey in the Audio A Menu. Refer to Annex G, Audio Modes for
information about DIDs.
Embedded 1-2 DID
¬ Left
® Right
l Ins
l Del
Table 4.58: Embedded 1-2 DID Options
Selected Option
Min:
Max:
Other:

Embedded 3-4 DID Option

The Embedded 3-4 DID option is selected from the Audio A Menu by
pressing the Embedded 3-4 DID softkey. The Embedded 3-4 DID option
has the same choices as the Embedded 1-2 DID option.

Audio PID Option

The Audio PID option is selected from the Audio A Menu by pressing the
Audio PID softkey. The option is used for entering or updating audio
PIDs. Enter a PID using the softkeys, then press the Enter softkey to
accept it.
To be DVB compliant, PIDs below 32 are reserved. Therefore PIDs 32 to
8191 are available for use. In the event of a clash, one of the PIDs will be
changed by the Encoder's internal checking algorithm
Audio PID
¬ Left
® Right
l Ins
l Del

Hardware Release Option

This option indicates the hardware release of the audio. It is for status only
and cannot be changed.

Software Release Option

This option indicates the software release of the currently selected audio
standard. It is for status only and cannot be changed.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Embedded 1-2 DID :
`1034 (Auto – 2FFh)'
Update using softkeys
Description
0 Off
1023 Select DID
>1023 Default DID
Audio PID :
`111 (006Fh)'
Update using softkeys
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-65