Syntax Option; Si Level Option; Network Id Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally
Service Name
¬ Left
® Right
l Ins
l Del

Syntax Option

To access the Syntax option for the output Transport Stream and
associated SI/PSIP, press the Syntax softkey in the Service Info Menu.
See Syntax Option, page 4-15 for details.

SI Level Option

To access the SI Level option, press the SI Level softkey in the Service
Info Menu. This enables the service information level to be specified. Use
the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.
SI Level
SI Level :
Table 4.5: SI Level Options
Selected Option
PAT/PMT/CAT only
PAT/PMT only
Off
On
On (No EIT)

Network Id Option

To access the Network Id option, press the Network Id softkey in the
Service Info Menu. This enables the Network Identity to be specified.
Use the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them. The information is included in
the NIT.
NOTE...
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Page 4-18
Service Name:
`Film'
Update using softkeys
PAT/PMT/CAT only
Update using softkeys
Description
Program Association Table/ Program Map
Table/ Conditional Access Table.
Program Association Table/ Program Map
Table.
Enter l
Quit l
Enter l
Quit l
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
+
—
ST.TM.E10074.1