Operation Mode ⑤ - Access All The Parameters - Siemens SINAMICS V10 Operating Instructions Manual

6.6.5 Operation mode ⑤ - Access all the parameters
Figure 6-25 Access all the parameters (example)
Parameters available for setting and reading in this mode
All the read-only parameters (including quick motor data setting specific parameters) and
settable parameters.
Parameter setting in "Access all the parameters" mode
● Setting a normal parameter
See the second figure in topic "Operation mode ① - Quick motor data setting (Page 66)" for
parameterization method.
● Setting an indexed parameter
Example: r0207[2]
Figure 6-26
● Viewing a normal read-only parameter
Example: r0007
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
Turn
OK
Press OK
Press OK
Setting an indexed parameter (example)
6.6 Overview of various operation modes
Turn
OK
Turn
OK
OK
Press
Turn
OK
Commissioning
Turn
. . .
OK
71