Hazards And Safety Provisions During Appliance Decommissioning - Angelo Po 0S1CP1E User Manual

SAFETY

HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING

When decommissioning the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads Source of hazard:
Hazard
Risk of injury due
to body overload
► Risk generated by materials/substances
Hazard
C o n c e n t r a t i o n
of unburned gas
emissions due to an
incorrect appliance
decommissioning
3386350__ut_GB_rev.1
Where or in which situa-
tions does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situa-
tions does the hazard occur?
When the appliance moves • Use a suitable lifting de-
Where or in which situa-
tions does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
vice
• observe the limit values
for lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning
tions must be carried out by
qualifi ed personnel
ENGLISH
Safety device
• P r o t e c t i o n
panels
• System
switch-dis-
connector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet
(e.g. for sus-
pended loads,
overhead opera-
tions...)
Safety
device
opera- None
11