Table 21: Compactpci Rear I/O Connector J3 Signals For Cp6007-Ra - Kontron CP6007-SA User Manual

Table 21: CompactPCI Rear I/O Connector J3 Signals for CP6007-RA

SIGNAL DESCRIPTION
SPA COMA signaling (RS-232)
SPB COMB signaling (RS-422/RS-232)
VGA Graphic signaling
USB0 to USB3 USB port signaling
SPEAKER Standard PC speaker
FAN Fan speed sensoring
DEBUG Debug output
LPa Rear I/O Link Port A (PICMG 2.16)
LPb Rear I/O Link Port B (PICMG 2.16)
LPab Center tap voltage for LPa and LPb
LPc Rear I/O Link Port C
LPd Rear I/O Link Port D
LPcd Center tap voltage for LPc and LPd
GPIO General purpose digital input/output; 3.3 V only
ON the CP6007-RA, COMA can be used either on the front panel or on the rear I/O. It is not
possible to use COMA on the front panel and on the rear I/O simultaneously.
For CP6007-RA, shall not use a standard RIO-module! Use only special RIO module!
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 47