Table of Contents
Advertisement
7/ uEFI BIOS
7.1. Starting the uEFI BIOS
The CP6007 is provided with a Kontron-customized, pre-installed and configured version of AMI Aptio V® uEFI BIOS
(referred to as uEFI BIOS in this manual). AMI BIOS firmware is based on the unified Extensible Firmware Interface
(uEFI) specification and the Intel® Platform Innovation Framework for EFI. This uEFI BIOS provides a variety of new
and enhanced functions specifically tailored to the hardware features of the CP6007.
The uEFI BIOS comes with a setup program which provides quick and easy access to the individual function settings
for control or modification of the uEFI BIOS configuration. The setup program allows the accessing of various menus
which provide functions or access to sub-menus with more specific functions of their own.
To start the uEFI BIOS setup program, follow the steps below:
1.
Power on the board.
2.
Wait until the first characters appear on the screen (POST messages or splash screen).
3.
Press the <F2> or the <DEL> key.
4.
If the uEFI BIOS is password-protected, a request for password will appear.
Enter either the user password or the supervisor password (see Security menu), press <RETURN>, and
proceed with step 5.
5.
A setup menu will appear.
The CP6007 uEFI BIOS setup program uses a hot key-based navigation system. A hot key legend bar is located on the
bottom of the setup screens. The following table provides information concerning the usage of these hot keys.
Table 47: Navigation Hot Keys Available in the Legend Bar
Sub-screen
Description
<F1>
The<F1> key is used to invoke the General Help window.
<F2>
The <F2> key is used to restore previous values.
<F3>
The <F3> key is used to load the standard default values.
<F4>
The <F4> key is used to save the current settings and exit the uEFI BIOS Setup.
<->
The <Minus> key is used to select the next lower value within a field.
<+>
The <Plus> key is used to select the next higher value within a field.
<→> or <←>
The <Left/Right> keys are used to select major setup menus on the menu bar.
For example:
<↑> or <↓>
The <Up/Down> keys are used to select fields in current menu, for example a setup function or a
sub-screen.
<ESC>
The <ESC> key is used to exit a major Setup menu and enter the Exit Setup menu.
Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed. Changed
settings remain changed.
<RETURN>
The <RETURN> key is used to execute a command or select a submenu.
www.kontron.com
Main screen, Advanced screen, Security screen, etc.
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 74
Advertisement
Table of Contents
