Table of Contents
Advertisement
8.4. Firmware Identification
8.4.1.
Get Device ID Command
Table 56: Get Device ID Command
COMMAND
Get Device ID
Byte
Data Field
--
--
Byte
Data Field
1
Completion code
2
10h
3
00h
4
02h
5
00h
6
51h
7
BDh or BFh
8..10
98h 3Ah 00h
03A98h = 15000 = Kontron
11..12
C0h B4h
B4C0h = Identifies the board/family firmware
13*
Release number of the IPMI firmware (varies depending on firmware revision):
10h for R10
11h for R11
14*
Board Geographical Address/slot number:
1 ... = Board in chassis slot 1...
15..16*
Reserved
* Bytes 13 through 16 are optional and defined by Kontron.
Invoking the IPMI command Get Device ID returns among other information the following data:
Manufacturer ID = 3A98h (Kontron IANA ID)
Product ID = B4C0h, identifies the board family of the IPMI firmware
Firmware revision (byte 4:5) reflects the version of the running firmware, which will change after firmware
update.
Release number of the IPMI firmware (byte 13) will be incremented with each firmware update
www.kontron.com
REQUEST DATA
RESPONSE DATA
Device ID
Device Revision
Firmware Revision 1: Major Firmware Revision
(varies depending on firmware revision)
Firmware Revision 2: Minor Firmware Revision, BCD encoded
(varies depending on firmware revision)
IPMI Version, holds IPMI command specification version, BCD encoded
Additional Device Support (SMC or BMC mode)
Manufacturer ID, LSB first
Product ID, LSB first
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
LUN
NetFn
00h
App = 06h
CMD
01h
// 92
Advertisement
Table of Contents
