2.7.8.
PMC Interface
The CP6007 provides one 3.3 V standard PMC interface with a dedicated 32-bit / 66 MHz PCI Express-to-PCI bridge.
The PMC interface is compliant with the IEEE 1386.1-2001 specification, which defines a PCI electrical interface for the
CMC (Common Mezzanine Card) form factor.
A PMC module can be connected to the CP6007 via the four standard PMC connectors J18, J19, J21 and J22.
Table 12: PMC PCI Frequency Configuration
FREQUENCY
33 MHz
33 MHz
66 MHz
2.7.9.
XMC Interface
For easy and flexible configuration a standard XMC connector, J17, is available. The board uses one x8 PCI Express 2.0
interface operating at 5.0 GT/s and compliant with the ANSI/VITA 42.0 and ANSI/VITA 42.3 specifications. x8 PCI
Express 3.0 operating at 8 GT/s is available on request.
www.kontron.com
M66EN Signal
Low
--
High
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
DIP SWITCH SW3
SWITCH 4
OFF
ON
OFF
// 37