8.3.2.
PICMG Commands
The following table shows an excerpt from the command list specified in the PICMG 3.0 R 2.0 AdvancedTCA Base
Specification and the PICMG AMC.0 Advanced Mezzanine Card Specification, R 1.0. The shaded table cells indicate
commands not supported by the IPMI firmware.
M = mandatory
Table 55: Supported PICMG Commands
COMMAND
Get PICMG Properties
FRU Control
Get FRU LED Properties
Get LED Color Capabilities
Set FRU LED State
Get FRU LED State
Get Device Locator Record ID
www.kontron.com
PICMG SPEC.
NETFN
SECTION
3-9
PICMG
3-22
PICMG
3-29
PICMG
3-25
PICMG
3-26
PICMG
3-27
PICMG
3-29
PICMG
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
CMD
KONTRON SUPPORT
ON IPMI
CONTROLLER
00h
M / Yes
04h
05h
M / Yes
06h
M / Yes
07h
M / Yes
08h
M / Yes
0Dh
M / Yes
N/A
// 91