Table 18: 64-Bit Compactpci Rear I/O Connector J3 Pinout For Cp6007-Sa - Kontron CP6007-SA User Manual

Table of Contents

Advertisement

2.7.11.3. CompactPCI Rear I/O Connectors J3, J4 and J5 Pinout
The CP6007 board provides rear I/O connectivity for peripherals. Standard PC interfaces are implemented and
assigned to the front panel and to the rear I/O connectors J3, J4 and J5.
When the rear I/O module is used, the signals of some of the main board/front panel connectors are routed to the
module interface. Thus, the rear I/O module makes it much easier to remove the CPU in the rack as there is practically
no cabling on the CPU board.
For the system rear I/O feature a special backplane is necessary. The CP6007 with rear I/O is compatible with all
standard 6U CompactPCI passive backplanes with rear I/O support.
The CP6007 conducts all standard rear I/O signals through the J3, J4 and J5 connectors.

Table 18: 64-bit CompactPCI Rear I/O Connector J3 Pinout for CP6007-SA

PIN
Z
A
19
NC
RIO_VCC
18
NC
LPa_DA+
17
NC
LPa_DB+
16
NC
LPb_DA+
15
NC
LPb_DB+
14
NC
LPa:LINK
13
NC
LPa:ACT
12
NC
NC
11
NC
NC
10
NC
USB1:VCC
9
NC
USB1:D-
8
NC
USB0:D-
7
NC
RIO_3.3V
6
NC
VGA:RED
5
NC
VGA:BLUE
4
NC
NC
3
NC
SPB:TX+/RTS
2
NC
SPA:RI
1
NC
SPA:RTS
The RIO_XXX signals are power supply OUTPUTS to supply the rear I/O module with power.
These pins MUST NOT be connected to any other power source, either within the backplane
itself or within a rear I/O module.
Failure to comply with the above will result in damage to your board.
www.kontron.com
B
C
RIO_VCC
RIO_3.3V
LPa_DA-
GND
LPa_DB-
GND
LPb_DA-
GND
LPb_DB-
GND
LPb:LINK
LPab:CT1
LPb:ACT
NC
NC
GND
NC
GND
USB0:VCC
GND
USB1:D+
GND
USB0:D+
GND
GPI0
GPI1
VGA:GREEN
VGA:SDA
VGA:HSYNC
VGA:VSYNC
NC
SPB:RX-/CTS
SPB:RX+/RXD
NC
SPA:DTR
SPA:CTS
SPA:RXD
SPA:DSR
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
D
E
RIO_+12V
RIO_-12V
LPa_DC+
LPa_DC-
LPa_DD+
LPa_DD-
LPb_DC+
LPb_DC-
LPb_DD+
LPb_DD-
RSV
RSV
(FAN:SEN2)
NC
RSV
(FAN:SEN1)
NC
NC
NC
NC
USB3:VCC
USB2:VCC
USB3:D-
USB3:D+
USB2:D-
USB2:D+
GPI2
SPEAKER
DEBUG:CLK
DEBUG:DAT
VGA:SCL
NC
SPB:TX-/TXD
NC
NC
NC
SPA:TXD
NC
SPA:DCD
RIO_ID1
F
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
// 45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp6007-ra

Table of Contents