Security Setup Menu; Table 50: Security Setup Menu Functions - Kontron CP6007-SA User Manual

7.2.3.

Security Setup Menu

Security
The Setup menu provides information about the passwords and functions for specifying the security
settings. The passwords are case-sensitive. The CP6007 provides no factory-set passwords.

Table 50: Security Setup Menu Functions

FUNCTION
Password Description
Administrator Password
User Password
HDD Security
Secure Boot menu
If there is already a password installed, the system asks for this first. To clear a password,
simply enter nothing and acknowledge by pressing <RETURN>. To set a password, enter it
twice and acknowledge by pressing <RETURN>.
7.2.3.1. Remember the Password
It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords may lead to being
completely locked out of the system.
If the system cannot be booted because neither the user password nor the supervisor password are known, refer to
the chapter 3.1, for information about clearing the uEFI BIOS settings, or contact Kontron for further assistance.
www.kontron.com
DESCRIPTION
Read-only field.
Information on Administrator and User Password and password length
requirements.
Create a new or change current administrator password.
Create a new or change current user password.
Configure SATA / NVMe device passwords.
Note: If no SATA / NVMe device is connected, this Setup item is not shown.
Enables/Disables Secure Boot and key management.
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 77