Compliance; Table 2: Environmental Conditions And Compliance - Kontron CP6007-SA User Manual

1.5. Compliance

This product complies with the requirements of the following standards.

Table 2: Environmental Conditions and Compliance

Operating
Temperature
Storage
Temperature
Vibration
(Sinusodial)
Single Shock
Permanent Shock
Compliance
Customers desiring to perform further environmental testing of the CP6007 must contact
Kontron for assistance prior to performing any such testing.
Boards without conformal coating must not be exposed to a change of temperature which
can lead to condensation. Condensation may cause irreversible damage, especially when the
board is powered up again.
Kontron does not accept any responsibility for damage to products resulting from
destructive environmental testing
www.kontron.com
-0°C to +60°C
Some connectors and supercap has operating temperature only 0°C to +70°C, relative
humidity (non-condensing) 10 % to 93 % at 40°C
-30°C to +85°C
relative humidity (non-condensing) 10 % to 93 % at 40°C
T.B.D.
T.B.D.
T.B.D.
CE/UKCA, RoHS II, WEEE
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 25