Table of Contents
Advertisement
2.1.1.
Graphics Controller
CP6007 provides low-power UHD graphics controllers (CP6007-SA: W-11865MRE; CP6007-RA: W-11555MRE) with
video and 2D capability. It supports one DP port on the front panel, and one VGA port and two HDMI/DVI ports at the
rear IO connector. All graphics ports can be used simultaneously.
2.2. Memory
CP6007-SA:
32 GByte soldered RAM with ECC and data speed of up to 3200 MHz
32 GByte SODIMM as additional option, dual channel DDR4 with ECC, up to 3200 MHz
CP6007-RA:
32 GByte soldered RAM with ECC and data speed of up to 3200 MHz
Only qualified DDR4 ECC SODIMM modules from Kontron are authorized for use with the
CP6007. Replacement of the SODIMM modules by the customer without authorization from
Kontron will void the warranty.
2.3. Watchdog Timer
The CP6007 provides a Watchdog timer that is programmable for a timeout period ranging from 125 ms to 4096 s in
16 steps.
The Watchdog timer provides the following modes or operation:
Timer-only mode
Reset mode
Interrupt mode
Dual-stage mode
In dual-stage mode, a combination of both interrupt and reset is generated if the Watchdog is not serviced.
2.4. Battery
The CP6007 is provided with an UL-approved CR2025, 3.0 V, "coin cell" lithium battery for the RTC. When a battery is
installed, refer to the operational specifications of the battery as this determines the storage temperature of the
CP6007.
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 28
Advertisement
Table of Contents
