Table of Contents
Advertisement
2.7.11.
CompactPCI Connectors
The complete CompactPCI connector configuration comprises five
standard connectors (2mm Hard Metric) designated as J1, J2, J3, J4
and J5.
Their functions are as follows:
J1 and J2: 64-bit CompactPCI interface with PCI bus signals,
arbitration, clock and power
J3, J4 and J5 with standard rear I/O interface functionality
CP6007-SA provides 2x GbE on J3, CP6007-RA provides 4x GbE
on J3
The CP6007 is designed for a CompactPCI bus architecture. The
CompactPCI standard is electrically identical to the PCI local bus.
However, these systems are enhanced to operate in rugged
industrial environments and to support multiple slots.
2.7.11.1. Connector Keying
The CompactPCI connector J1 supports guide lugs to ensure a
correct polarized mating.
The CP6007 supports universal PCI VI/O signaling voltages
with one common termination resistor configuration and
includes a PCI VI/O voltage detection circuit. If the PCI VI/O
voltage is 5 V, the maximum supported PCI frequency is 33
MHz.
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
Figure 7: Compact PCI Connectors
// 40
Advertisement
Table of Contents
