6.4.1.2. Removing a M.2 Card
To remove a M.2 card:
1.
Power off the board, and then detach the power cord from the power supply.
2.
Remove the CP6007 board.
3.
Remove the 4x mounting screws and then remove the M.2 heat sink from the CP6007
4.
Remove the screw securing the M.2 card.
5.
The M.2 card pops up. Grasp it by the edges and slide it out.
Figure 14: Removing a M.2 Card
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 72