Table of Contents
Advertisement
2.7.10 CompactPCI Connectors
The complete CompactPCI connector configuration comprises
up to four standard connectors (2mm Hard Metric) designated
as J1, J2, J3 and two high-speed serial ZDplus connectors, J4
and J41.
Their functions are as follows:
»
J1 and J2: 64-bit CompactPCI interface with PCI bus
signals, arbitration, clock and power
»
J3 and J5 with standard rear I/O interface function-
ality
»
J4 and J41 for high-speed serial rear I/O intercon-
nection
The CP6005(X)-SA is designed for a CompactPCI bus architec-
ture. The CompactPCI standard is electrically identical to the
PCI local bus. However, these systems are enhanced to operate
in rugged industrial environments and to support multiple
slots.
2.7.10.1 Connector Keying
The CompactPCI connector J1 supports guide lugs to ensure a
correct polarized mating.
The CP6005(X)-SA supports universal PCI VI/O signaling volt-
ages with one common termination resistor configuration and
includes a PCI VI/O voltage detection circuit. If the PCI VI/O
voltage is 5 V, the maximum supported PCI frequency is 33 MHz.
www.kontron.com
User Guide
CP6005(X)-SA
Figure 7: CompactPCI Connectors
standard
J5
CompactPCI
J41
ZDplus
J4
J3
J2
standard
CompactPCI
J1
Standard CompactPCI:
FEDCBAZ
ZDplus:
DCBA
22
1
1
10
11
20
19
1
22
1
25
1
36
Advertisement
Table of Contents
