Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 160

Error Error definition and causes
code
CCD5H A value greater than the parameter range
is set.
CCD6H A value smaller than the parameter range
is set.
CCDAH The application cannot transmit or store
the data.
CCFFH Others
Failed to access to CAN application
objects
CF40H Incorrect frame was received.
CF41H Incorrect frame was received.
CF42H Incorrect frame was received.
CF43H An error has occurred.
CF44H Incorrect frame was received.
D03BH System error
to
D03CH
D0A3H Send processing of the transient
transmission has failed.
D203H The read data or write address of the
transient transmission is incorrect.
D205H The target station number of transient
transmission is incorrect.
D20AH The target network number of transient
transmission is incorrect.
8 TROUBLESHOOTING
158
8.5 List of Error Codes
Action
• Check if the specified Index and subIndex are correct.
• Check if the data value of the object corresponding to the
specified Index and subIndex is correct.
• Set the PDO mapping again and try again.
• Check if the specified Index and subIndex are correct.
• Check if the data value of the object corresponding to the
specified Index and subIndex is correct.
• Set the PDO mapping again and try again.
The same error is displayed even if the data transmission or
storage is performed again, please consult your local Mitsubishi
representative.
The same error is displayed even if the access to the object is
performed again, please consult your local Mitsubishi
representative.
• Check the operating status and connection status of the target
device.
• Check the connection of the cable and switching hub.
• Check the line status of Ethernet.
• Reset the CPU module and target device, and retry the
operation.
If the above actions do not solve the problem, contact the
manufacturer of the target device.
• Check the operating status and connection status of the target
device.
• Check the connection of the cable and switching hub.
• Check the line status of Ethernet.
• Reset the CPU module and target device, and retry the
operation.
If the above actions do not solve the problem, contact the
manufacturer of the target device.
• Check the operating status and connection status of the target
device.
• Check the connection of the cable and switching hub.
• Check the line status of Ethernet.
• Reset the CPU module and target device, and retry the
operation.
If the above actions do not solve the problem, contact the
manufacturer of the target device.
• Check the operating status of the external device.
• Check if there is any error in the line status.
If the above actions do not solve the problem, contact the
manufacturer of the target device.
• Check the operating status and connection status of the target
device.
• Check the connection of the cable and switching hub.
• Check the line status of Ethernet.
• Reset the CPU module and target device, and retry the
operation.
If the above actions do not solve the problem, contact the
manufacturer of the target device.
Please consult your local Mitsubishi representative.
• Check the network status using the CC-Link IE TSN/CC-Link IE
Field diagnostics of the engineering tool, and take action.
• When the own station, target station, or relay station detected an
error, identify the cause of the error and take action.
• Correct the target station number of transient data, and retry the
operation.
Correct the read data or write address at the transient request
source, and retry the operation.
Correct the target station number at the transient request source,
and retry the operation.
Correct the target network number at the transient request source,
and retry the operation.
Detailed information 1
Detailed information 2













