Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 77

Operation when combined with versions of other products
The following tables show how parameters used for the Motion module operate in combination with other products that
support or do not support the CC-Link IE TSN Protocol version 2.0.
• "CC-Link IE TSN Class Setting" for each device station in the "CC-Link IE TSN Configuration" window of the "Network
Configuration Settings"
CC-Link IE TSN Protocol version 2.0 support
Engineering tool
Not supported
Supported
• Multiplier setting for "Low-Speed" in "Multiple Period Setting" under "Basic Settings"
CC-Link IE TSN Protocol version 2.0 support
Engineering tool
Not supported
Supported
• "TSN HUB Setting" in "Connection Device Information" under "Basic Settings"
CC-Link IE TSN Protocol version 2.0 support
Engineering tool
Not supported
Supported
Precautions
If parameters are written with an engineering tool of software version "1.085P" or later for a project created with an
engineering tool of software version earlier than "1.085P" without opening "Network Configuration Settings" once, the module
operates with the CC-Link IE TSN Protocol version 1.0.
4.3 Structure of CC-Link IE TSN Class B/A Devices (Mixture of CC-Link IE TSN Protocol version 1.0 and 2.0) and Ethernet Devices
Module
Not supported
Supported
Not supported
Supported
Module
Not supported
Supported
Not supported
Supported
Module
Not supported
Supported
Not supported
Supported
Operation
CC-Link IE TSN Protocol version 1.0
CC-Link IE TSN Protocol version 1.0
CC-Link IE TSN Protocol version 1.0
CC-Link IE TSN Protocol version 1.0/2.0
Operation
Only "×16" settable
Only "×16" settable
A value other than "×16" results in the error "Network parameter
error" (error code: 2221H).
"×16", "×32", "×64", or "×128" selectable
Operation
Setting not allowed
Setting not allowed
CC-Link IE TSN Protocol version 1.0 regardless of the setting
value
Operate according to the setting value
4 SYSTEM CONFIGURATION
4
75