Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 70

Precautions
TSN switching hubs cannot be connected in the following configuration.
• If "TSN HUB Setting" is set to "Not to Use TSN HUB", TSN switching hubs cannot be connected. If a TSN switching hub is
connected, device stations may not perform a data link. When connecting a TSN switching hub, set "TSN HUB Setting" to
"Use TSN HUB".
No.0: Master station
No.1, No.2, No.3, No.4: Remote station
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
• If "TSN HUB Setting" is set to "Not to Use TSN HUB", connection in a star topology is not available via a TSN switching
hub. If a device station is connected to a TSN switching hub, the device station may not perform a data link. In this case, the
error "Connection configuration error" (error code: 1806H) occurs in the master station. When connecting a TSN switching
hub, set "TSN HUB Setting" to "Use TSN HUB".
No.0: Master station
No.1, No.2, No.3, No.4, No.5: Remote station
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
4 SYSTEM CONFIGURATION
68
4.2 Structure of CC-Link IE TSN Class B/A Devices (CC-Link IE TSN Protocol version 2.0 Only) and Ethernet Devices
TSN switching
No.1
hub
Class B
TSN switching
No.1
hub
Class B
No.4
Class B
No.2
Class B
General-purpose
switching hub
General-purpose
No.2
switching hub
Class B
No.3
Class A
No.4
Class A
No.3
Class A
No.5
Class A