Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 120

3.
Confirm the selected PDO mapping patterns.
4.
Click the [OK] button to close "PDO Mapping Setting".
■Cases where the PDO mapping will not be set
In the following cases, the PDO mapping will not be set for the appropriate device station.
• When more than one point is set in "RWr Setting" and the TPDO entry is not assigned.
• When more than one point is set in "RWw Setting" and the RPDO entry is not assigned.
• When there is a value entered in "Index" while there is a blank row in "Sub-Index".
• When an entry exceeding the link device range is assigned.
• When a single entry is assigned to multiple link devices.
5 PARAMETER SETTINGS
118
5.5 "CC-Link IE TSN Configuration" Window