Generic Terms And Abbreviations - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
CPU module
Data link
Device station
Drive unit
Engineering tool
Ethernet device
Ethernet-equipped module
Extension module
I/O module
Intelligent module
Motion module
Network module
PDO
PTP
RAS
RWr
RWw
RX
RY
SB
SDO
SLMPSND
SW
Description
An abbreviation for the MELSEC iQ-F series CPU module
A generic term for a cyclic transmission and a transient transmission
• A generic term for a local station and remote station on CC-Link IE TSN
• A generic term for a local station, remote I/O station, remote device station, and intelligent device station on
CC-Link IE Field Network
A generic term for motor drive devices such as a servo amplifier
A generic term for GX Works3 and MR Configurator2
A generic term for the devices supporting IP communication (such as a personal computer, a vision sensor, and
a bar code reader)
A generic term for the following modules when the Ethernet communication function is used:
• CPU module
• FX5-ENET
• FX5-ENET/IP
A generic term for the FX5 extension modules, extension modules (extension cable type), and extension
modules (extension connector type)
A generic term for the I/O modules (extension cable type) and I/O modules (extension connector type)
The abbreviation for the intelligent function module
An abbreviation for the MELSEC IQ-F series Motion module.
A generic term for the following modules:
• Ethernet interface module
• Module on CC-Link IE TSN (the Motion module and a module on a remote station)
• CC-Link IE Controller Network module
• Module on CC-Link IE Field Network (a master/local module, and a module on a remote I/O station, a remote
device station, and an intelligent device station)
• MELSECNET/H network module
• MELSECNET/10 network module
• RnENCPU (network part)
An abbreviation for Process Data Object. A collection of the application objects transmitted periodically between
multiple CANopen nodes.
An abbreviation for Precision Time Protocol. A predefined protocol for time synchronization between devices on
a network.
An abbreviation for Reliability, Availability, and Serviceability. This term refers to the overall usability of automated
equipment.
A remote register of the link device. This refers to word data input from a device station to the master station. (For
some areas in a local station, data are input in the opposite direction.)
A remote register of the link device. This refers to word data output from the master station to a device station.
(For some areas in a local station, data are output in the opposite direction.)
Remote input of the link device. This refers to bit data input from a device station to the master station. (For some
areas in a local station, data are input in the opposite direction.)
Remote output of the link device. This refers to bit data output from the master station to a device station. (For
some areas in a local station, data are output in the opposite direction.)
Link special relay. Bit data that indicates the operating status and data link status of a module on CC-Link IE.
A communication object of CANopen (Service Data Object). A message used to access the object entries inside
the object dictionary of an optional CANopen node. Used for non-periodic transmission between stations.
A generic term for the J.SLMPSND, JP.SLMPSND, G.SLMPSND, and GP.SLMPSND
Link special register. Word data that indicates the operating status and data link status of a module on CC-Link
IE.
17