Table of Contents
Advertisement
Operating Manual
MHM-97884
Procedure
1. Click Next to send the already entered configuration data to the AMS EZ 1000
2. Click Next.
3. Follow the instructions of the wizard.
4. Click Finish to exit the wizard.
5. Click Close configuration to exit the configuration editor. Do not click Send &
MHM-97884, Rev. 1.8
Converter.
CAUTION
Connections to external devices may be interrupted when sending configurations.
The output voltage of the AMS EZ 1000 Converter is set to > -1.5 V during this
process.
The sending progress is displayed.
The program calculates the necessary calibration data. The progress is displayed.
close.
Configuration
October 2023
81
Advertisement
Table of Contents
