Emerson Machinery Health AMS EZ 1000 Operating Manual page 16

Application and design
October 2023
Figure 3-1: AMS EZ 1000 Converter
A. Two screw terminals for -24 V DC supply voltage.
B. Two screw terminals for sensor output signal (range: -2 V to -18 V)
C. Green Channel OK LED (see
D. Button for offline calibration (Easy calibration) without AMS Machine Studio and for
E. Configuration interface (USB 2.0 Micro-B socket with cover)
F. Sensor socket with external thread for sensor connection
G. Build-in spring DIN rail clip
Table 3-1: LED blinking pattern
Event
Normal operation
Offline (Easy)
calibration
Offline (Easy)
calibration – failure
detected
Automatic calibration
with AMS Machine
Studio
16
Firmware update
Blinking pattern
Steady green light
Slow flashing (1 Hz) for approximately 5
seconds; request of calibration – before
measurement
Double flashing (1 Hz) for approximately 5
seconds during measurement
(see Offline (Easy) calibration
Unlimited fast flashing (5 Hz) – until power
off/on the converter
Slow flashing (1 Hz) for approximately 5
seconds; request of calibration – before
measurement
Double flashing (1 Hz) for approximately 5
seconds during measurement
Table 3-1)
for details)
Operating Manual
MHM-97884
1
Sequence
MHM-97884, Rev. 1.8