Emerson Machinery Health AMS EZ 1000 Operating Manual page 24

Installation and commissioning
October 2023
24
mounting rail adapter in accordance to the desired alignment of the AMS EZ 1000
Converter.
Figure 5-4: Possible base plate alignments
Turn the mounting rail adapter with the positioned base plate upside down. The
mounting rail adapter has four holes – two with an inserted nut and two without
nut. Fix the base plate on the mounting rail adapter by inserting the M4x5 screws
into the holes without nut and screwing them into the threaded holes of the base
plate. See Figure 5-5. Figure 5-6
Figure 5-5: Mounting rail adapter with base plate – bottom view
A. Hexagon socket head cap screw M4x5
B. Mounting rail adapter
C. Base plate
shows the top view of the fixed base plate.
Operating Manual
MHM-97884
MHM-97884, Rev. 1.8