Table of Contents
Advertisement
Operating Manual
MHM-97884
MHM-97884, Rev. 1.8
Figure 8-24: Manual calibration
Sensor
Enter the sensor gain. See
gain
an EZ105x, an EZ108x, or an EZ116x sensor. The abbreviation for the
sensor gain on the label is SG.
Sensor
Enter the sensor offset. See
offset
using an EZ105x, an EZ108x, or an EZ116x sensor. The abbreviation
for the sensor offset on the label is SO.
Sensor
Enter the frequency offset. See
frequency
using an EZ105x, an EZ108x, or an EZ116x sensor. The abbreviation
offset [Hz]
for the sensor frequency offset on the label is SFO. When using the
EZ1900-ADAP-90 adapter to connect an EZ108x-xx-xx-xxx sensor,
add 450 Hz to the sensor frequency offset stated on the label to
compensate for the adapter influence on the calibration.
Cable gain
Enter the gain of the extension cable. See
the data on the cable. The abbreviation for the cable gain on the
Figure 8-25
where to find the data if using
Figure 8-25: Location sensor data
A. Label with sensor calibration data
B. Label with sensor type and serial
number.
Figure 8-25
where to find the data if
Figure 8-25
where to find the data if
Figure 8-26
Configuration
October 2023
where to find
79
Advertisement
Table of Contents
