Emerson Machinery Health AMS EZ 1000 Operating Manual page 107

Operating Manual
MHM-97884
9. Check the configuration of the AMS EZ 1000 Converter. If necessary load the
10. Disconnect the USB cable.
11. Finally, check the calibration of the AMS EZ 1000 Converter (see
MHM-97884, Rev. 1.8
Do not remove the USB cable during the update process.
After the successful firmware update, the AMS EZ 1000 Converter restarts and the
LED switches to a steady light – provided that a sensor is connected and within the
OK range.
The firmware version, currently installed on the AMS EZ 1000 Converter, can be
verified by the Online View of AMS Machine Studio (see
configuration saved beforehand to the converter (see
file to the AMS EZ 1000 Converter).
Maintenance, fault finding, and repair
Online View).
Send a saved configuration
Linearity
October 2023
check).
107