Table of Contents
Advertisement
Configuration
October 2023
CAUTION
The preset configuration on the converter including the calibration data will be deleted
and replaced by the default configuration.
Compare
Click Compare to show differences between the configuration on the converter and in the
memory of the used Laptop or PC.
Figure 8-12: Button Compare
Report
Click Report to open the report viewer. This report shows all configured parameters and
some additional information, such as serial number and user information. This report can
be exported to different formats, such as PDF, XPS, and Microsoft Excel, or it can be
printed.
Figure 8-13: Button Report
Where required, change the logos in the header of the report:
1. Close the configuration editor. The configuration is automatically saved as a draft
2. Click File and then Settings.
3. Click the buttons with the dotted line within the Report settings area to browse for
4. Click OK to confirm your settings.
5. Open the configuration editor, and go back to the report.
70
configuration.
The Settings window opens.
logos.
Logos with file format png or jpg can be selected.
The window closes.
Now the report contains the selected logos.
Operating Manual
MHM-97884
MHM-97884, Rev. 1.8
Advertisement
Table of Contents
