Environmental Conditions And Mechanical Design - Emerson Machinery Health AMS EZ 1000 Operating Manual

Technical data
October 2023
Table 11-17: Additional inaccuracies – DSL
Parameter
Extended measuring range: 24.0 mm
(Extended range factor: 3.0)
1 Requires previous Automatic calibration, see
sensors
Table 11-18: Sensor temperature inaccuracies
Measuring range
8 mm
16 mm
(Extended range factor: 2.0)
24 mm
(Extended range factor: 3.0)
1 Stated linearity errors apply to maximum cable lengths and maximum temperatures. Linearity
errors for shorter cables and lower temperatures are lower. Contact support for details.
11.5 Environmental conditions and mechanical
design
The measuring chain is designed for industrial applications and may be used in heights of
up to 2000 m above sea level.
The application environment must be verified not to exceed the environmental
specifications listed in the operating manual of each part of the measurement chain.
Environmental temperature
Reference value
Nominal operating range
Limits for storage and transport
maximal Vibration
120
Automatic calibration
1
Multipoint calibration
(continued)
Additional Measurement Inaccuracy
(DSL),
Test range
± 16.0%
± 3.5%
Calibration – PR 6424, PR 6425, and PR 6426
Temperature range
-35°C to +85°C
(Operating range converter)
-35°C to +180°C
(Operating range sensor)
-35°C to +180°C
(Operating range sensor)
-35°C to +180°C
(Operating range sensor)
+23°C
-35°C to +85°C
-35°C to +85°C
5 g at 60 Hz
Operating Manual
MHM-97884
1
Additional linearity error
± 15.0%
± 3.0%
± 10.0%
± 20.0%
MHM-97884, Rev. 1.8