Input - Emerson Machinery Health AMS EZ 1000 Operating Manual

Operating Manual
MHM-97884
Figure 8-19: Basic
Name
Machine
Area
Plant
User (last
change)
Date (last
change)
8.5.3

Input

Define the eddy current sensor to be connected.
Note
The change of the parameters Sensor and Extension cable of an already configured
converter requires the recalibration of the converter.
Figure 8-20: Input
Point Id
Sensor
MHM-97884, Rev. 1.8
Enter the converter name or a short description of the measurement.
Enter the machine designation.
Enter a name or a short description of the area where the machine is
located.
Enter the plant/factory name.
The name of the user who made the last configuration is displayed here.
The user name of the login data of the operation system is used for this
automatic entry. It is not possible to change the content of this field.
The date and time of the last converter configuration is displayed here.
Time and date of the configuration PC is used. It is not possible to
change the content of this field.
Enter the point ID of the measuring point where the sensor is installed.
Click the button behind the display field to open the selection dialog
for the sensor. The dialog lists all eddy current sensors compatible with
the AMS EZ 1000 Converter. Select the appropriate sensor, and click OK.
Configuration
October 2023
73