Operating Manual
MHM-97884
Figure 5-3: Parts DIN Rail for Horizontal Mount adapter
A. Mounting rail adapter
B. Base plate
C. Mounting rail
D. End clamp
E. 2x washer for M4 screws
F. 4x Hexagon socket head cap screw M4x5
Prerequisites
1. Hexagon socket wrench, size 4 mm
2. Suitable tool such as a flat-tip screwdriver to unlock the mounting rail adapter
Procedure
1. Mount the base plate on the mounting rail adapter. There are three possible
MHM-97884, Rev. 1.8
(Only necessary when the adapter must be removed from the mounting rail.)
alignments of the base plate (see
Installation and commissioning
Figure
5-4). Position the base plate on the
October 2023
23