Configuration
October 2023
3. Select EZ 1000, and click Create Configuration to open the configuration editor.
8.3
Start of an online configuration
Procedure
1. Select the AMS EZ 1000 Converter from the Network list in the left part of the main
66
Figure 8-5: New Configuration dialog
See
Configuration editor and parameters
Note
The calibration requires an online connection to the AMS EZ 1000 Converter. Move
the converter configuration from Workspace by drag and drop to an already
connected converter below Network. Complete the configuration.
view, then click Configure.
Operating Manual
for parameter description and settings.
MHM-97884, Rev. 1.8
MHM-97884