Emerson Machinery Health AMS EZ 1000 Operating Manual page 33

Operating Manual
MHM-97884
Sensor connection
The following sensor types can be connected.
• EZ105x-xx-xx-xxx, EZ108x-xx-xx-xxx, and EZ116x-xx-xx-xxx
• PR 6424/0xx-xx0, PR 6425/010-1x0, and PR 6426/0x0-xx0
The sensor adapter EZ1900-003-ADAP-1 is required for the connection of these
sensors.
Figure 5-14: Sensor adapter EZ1900-003-ADAP-1
• Bently Nevada 3300 XL 8 mm Proximity Probes 33010x.
The sensor adapter EZ1900-003-ADAP-2 is required for the connection of 33010x
probes.
Figure 5-15: Sensor adapter EZ1900-003-ADAP-2
The sensor socket of the converter is a mini LEMO socked with an external thread to secure
the sensor against unintentional removing.
EZ1900-ADAP-90 adapter for EZ108x-xx-xx-xxx
Use the EZ1900-ADAP-90 adapter, shown in
sensor to an AMS EZ 1000 Converter mounted in a housing with limited space in depth.
See Figure 5-17
MHM-97884, Rev. 1.8
A. Connector to the AMS EZ 1000 Converter (without cap nut)
— To connect, plug the connector into the sensor socket. The connector locks with
an audible click.
— To unlock, pull the connector out of the sensor socket.
B. Label
C. Connector to PR 6424/0xx-xx0, PR 6425/010-1x0, or PR 6426/0x0-xx0
D. Total adapter length: approximately 365 mm
A. Connector to the AMS EZ 1000 Converter
See Connect and Disconnect
B. Label
C. Connector to BN 33010x
D. Total adapter length: approximately 365 mm
for dimensions.
Installation and commissioning
for how to use the connector.
Figure 5-16, to connect an EZ108x-xx-xx-xxx
October 2023
33