Positioning; Power And Communication Connections - PerkinElmer VICTOR Nivo User Manual

7 Stacker Module (Optional)
7.2

Positioning

Place the stacker module on a flat and even bench or table surface free of dust,
l
liquids or acidic vapors.
Make sure that there is sufficient free space above the device for the
l
movements of the gripper arm. See also section 10.3 "Stacker Module
(Optional)", page 70.
Avoid places subjected to direct sunlight and vibrations. For detailed
l
environmental requirements see chapter 1.3 "Environmental Conditions", page
8.
Make sure that the power cord can be easily unplugged when needed.
l
7.3

Power and Communication Connections

Stacker module:
1. USB-B port (connection to the reader)
2. Power supply (24 V DC
VICTOR Nivo reader:
3. USB-A port (connection to the stacker)
4. LAN/Ethernet (RJ-45, connection the PC)
48
, stacker module)
Warning!
Use only the external power supply unit and power cord supplied with
the stacker module. Make sure that the local main power matches the
power requirements of the external power supply. The power
requirements are printed on the power supply.
VICTOR Nivo – User Manual