5. Power supply (24 V DC
6. USB-B port (for service purposes only)
7.4
Turning the Stacker On and Off
The power supply of the stacker is controlled by the VICTOR Nivo reader. When the
reader is switched on/off, the stacker is also switched on/off.
To turn the entire system on, briefly press the power button on the VICTOR
l
Nivo reader.
Open the VICTOR Nivo user interface on your control device (PC or tablet) and
sign in. The reader is initialized. The stacker is also initialized (if connected).
To turn the entire system off, press and hold down the power button on the
l
VICTOR Nivo reader for at least 3 seconds until the light of the button goes out.
VICTOR Nivo – User Manual
, reader)
Warning!
The gripper and the gripper arm of the optional stacker module may
start moving, especially if the gripper arm is not in home position.
Keep away from the working area of the stacker during initialization.
7 Stacker Module (Optional)
49