PerkinElmer VICTOR Nivo User Manual page 24

3 Reader Installation
1. Connect the TP-LINK wireless router (LAN/WAN socket) to the Ethernet socket
on the rear of the VICTOR Nivo using the provided LAN cable.
2. Connect the wireless router (Power socket) to the USB power supply using the
TP-LINK external USB power cable. Plug the USB power supply into a wall
socket.
Connecting to the VICTOR Nivo
1. Switch on the VICTOR Nivo using the power switch.
2. Switch on your control device with wireless network capability (e.g. a laptop).
If you are using the optional laptop or tablet from PerkinElmer and start it for
l
the first time, the Windows 10 first start routine will appear. Configure user
name, password, language settings etc.
3. Connect your control device with the instrument:
Make sure your wireless adapter is turned on.
l
Connect to the wireless network (see default network name on the router's
l
service card, labeled with Wi-Fi Name (SSID)).
Enter the password (see default password, labeled with Wi-Fi
l
Password/PIN).
To change the SSID network name and password of your wireless network,
l
please refer to the router´s manual.
If the connection cannot be established, check the router settings. See
l
VICTOR Nivo Software Manual, chapter "Wi-Fi Router Configuration".
4. Open your web browser to connect to the VICTOR Nivo.
Type http://192.168.0.2 into the address bar and press the Enter key.
l
The user interface appears and the instrument is initialized automatically.
Make this page your default starting page.
l
24 VICTOR Nivo – User Manual