Operation Via Software; Control Panel; Control Buttons - PerkinElmer VICTOR Nivo User Manual

7.6

Operation via Software

The stacker is mainly controlled by the VICTOR Nivo control software. The stacker
can be operated either using the functions on the SETTINGS > STACKER page or
by protocol operations.
If you want to use the reader without stacker, you can remove all stacker-specific
elements from the user interface: SETTINGS > MAINTENANCE > About >
Remove Stacker (only available for admins).
For details please see VICTOR Nivo Software Manual.
7.7

Control Panel

Certain stacker functions can be triggered directly using the buttons on the control
panel. The control panel also indicates the status of the magazines and the stacker.
7.7.1

Control Buttons

Stop
l
Stops all stacker functions (only functional when the stacker is moving). Follow
the instructions in the software to resume or restart the action.
Park
l
Moves the gripper arm to the Park position (away from the magazines to the far
left). This will give you free access to the magazines. Only functional when the
stacker is idle (LED ring shows steady green).
Home
l
Moves the gripper arm to the Home position on the right (above the
magazines). Only functional when the stacker is idle (LED ring shows steady
green).
VICTOR Nivo – User Manual
7 Stacker Module (Optional)
51