Unloading A Filter - PerkinElmer VICTOR Nivo User Manual

8 Retooling
Notice
Always use the filter loading position to insert filters into the filter storage!
Never place a filter into any other position. The loading position is presented
by the instrument following the filter loading process in the software. The
filter loading position is identifiable by its low frame for easy filter access. All
other positions contain a high frame and must not be used for loading.
Notice
Always handle the filters with care:
l
l
l
4. Close the optics loading door and click Done, if you are ready.
The instrument moves the filter into the filter storage system. Now the filter
should be visible in the filter list as a loaded filter (bright background).
8.1.2

Unloading a Filter

1. Select a present filter (indicated by a bright background) from the list. In the
example below, the 260/10nm filter is selected:
56
Only touch the filter holder, if possible with gloves.
Never touch the filter glass to avoid fingerprints.
Observe the cleaning instructions (see chapter 9.3 "Cleaning Optical
Components ", page 62).
VICTOR Nivo – User Manual