Mounting Dimensions; Cable Backward Model - Epson C Series Manual

3.3 Mounting Dimensions

Mounting Area
Be sure to have the following space available in addition to the space for mounting the
Manipulator, Controller, and peripheral equipment.
NOTE
The minimum bend radius of the power cable is 90 mm. When installing the cable, be sure

to maintain sufficient distance from obstacles. In addition, leave enough space for other
cables so that they are not bent forcibly.
NOTE

Make sure to leave 35 mm or more space around the fan cover.

3.3.1 Cable Backward Model

C series Rev.2
Space for teaching points
Space for maintenance and inspections (for installing jigs)
Space for cables
C12 Manipulator 3. Environment and Installation
[Unit: mm]
189