Epson C Series Manual page 6

Before Reading This Manual
This section describes what you should know before reading this manual.
Structure of Control System
C series Manipulators can be used with the following combinations of Controllers and
software.
Setting by Software
EPSON
Turning ON/OFF Controller
When you see the instruction "Turn ON/OFF the Controller" in this manual, be sure to turn
ON/OFF all the hardware components.
Photos and Illustrations Used in This Manual
The appearance of some parts may differ from those on an actual product depending on
when it was shipped or the specifications. The procedures themselves, however, are accurate.
iv
C4 series
Controller
Software
C8 series
Controller
Software
C12 series
Controller
Software
This manual contains setup procedures using the software.
RC+
Those sections are indicated by the symbol on the left.
: RC700, RC700-A
: EPSON RC+ 7.0
: RC700-A
: EPSON RC+ 7.0 Ver.7.1.3 or later (C8XL)
EPSON RC+ 7.0 Ver.7.1.4 or later (C8, C8L)
EPSON RC+ 7.0 Ver.7.2.0 or later (wall mounting)
: RC700-A
: EPSON RC+ 7.0 Ver.7.4.6 or later
C series Rev.2