Table of Contents
Advertisement
C4 Manipulator 6. Options
Power Cable
You must provide a power cable.
The power cable is required to meet the specifications below.
(1)
Plug
(2)
Flexible cable
(3)
Appliance
coupler
For Japan
Plug
Code
Connector
64
Item
Comply with local safety regulation
- Class I（2P+PE）, AC250V, 6A or 10A
Ex.: CEE Pub.7 Certified, CCC Certified, KC Certified,
- Class I（2P+PE）, AC125V, 7A or 12A or, 15A etc.
Ex.: UL Certified, PSE Certified, BSMI Certified
Comply with IEC/EN standards or local safety regulation
Ex.: IEC 60227-1
IEC 60227-5
EN 50525-1
EN 50525-2-11 Electric cables - Low voltage energy cables
Comply with IEC/EN standards or local Safety regulation
- IEC / EN 60320-1: Appliance couplers for household and
- Standard Sheet C13: AC250V / 10A
(1)
Item
PSE qualified
Class I (2P+PE), AC125V, 7A or higher
PSE qualified
0.75mm
or larger
2
PSE qualified
IEC 60320-1 Standard Sheet C13: AC125V/10A or higher
Specification
BS1363, PSB Certified, BIS Certified, SABS Certified
General requirements
Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V
- Part 5: Flexible cables (cords)
General requirements
of rated voltages up to and including
450/750 V (Uo/U) -
general applications - Flexible cables with
thermoplastic PVC insulation
similar general purposes - Part 1: General
requirements
(2)
Specification
Part
2-11: Cables for
(3)
C series Rev.2
Advertisement
Table of Contents
