Setup & Operation 3. Environment and Installation
3.3 Mounting Dimensions
Mounting Area
Be sure to have the following space available in addition to the space for mounting the
Manipulator, Controller, and peripheral equipment.
The minimum bend radius of the power cable is 90 mm. When installing the cable, be sure
NOTE
to maintain sufficient distance from obstacles. In addition, leave enough space for other
cables so that they are not bent forcibly.
NOTE
In case of C8-A1401*** (C8XL):
Make sure to leave 35 mm or more space around the fan cover.
3.3.1 Cable Backward Model
C8-A701** (C8)
34
Space for teaching points
Space for maintenance and inspections (for installing jigs)
Space for cables
[Unit: mm]
C8 Rev.13